Press "Enter" to skip to content

Fierce Little Dragon Amigurumi Pattern

Do you need someone to guard your treasure? Or maybe keep an
eye on your computer? Or do you want a small but loyal friend?
Well, this fierce little Dragon is for you!
This pattern is an update of my ‘fierce but friendly really’ dragon
pattern. I’ve made a few minor changes, in particular the wings are
stiffer now, and I’ve written it out in a longer form that should be
easier to follow.

Materials:
Approx 35g double knitting weight yarn, of whichever colour or
colours you wish to use for your dragon.
Small amount of cream/beige yarn to sew claws.
Stuffing.
1 pair 7.5 mm safety eyes or beads of a similar size for eyes (or you
can embroider the eyes, so a small amount of yarn to do that).
Tapestry needle.
3.5mm hook (US E hook).
Finished size: approximately 28cm/11” nose to tip of tail, 20cm/8″
wingspan.

Abbreviations:
ch = chain
st = stitch or stitches
ss = slip stitch
sc = single crochet (US), double crochet (UK)
hdc = half double crochet (US), half treble crochet (UK)
dc = double crochet (US), treble crochet (UK)
fpsc = front post single crochet
fphdc = front post half double crochet
fpdc = front post double crochet
tog = together
sc2tog = decrease by working two sc together
YOH = Yarn over hook
FO = fasten off
Special stitch instructions:
Fpsc, fphdc or fpdc: work stitch (sc, hdc or dc) by putting your hook
from right to left around the back of the post of the next stitch on
the previous row. This will create a ridge on the other side of your
work.
Notes:
This dragon is made mostly in rounds, although the wings are made
in rows. Do not join rounds unless told to, use a stitch marker to
mark the start of a round – a small piece of different coloured yarn
placed under the stitch at the start of the round will do. To start a
round, you can use the magic ring method, but I prefer (ch2, work
6 sc into 1st ch). If you work the 6 sc over the tail of yarn as well
you can use that to pull the hole tight.
Stuff the body as you go along, not too tightly so that the dragon
can bend its neck and tail.

Start at the dragon’s nose:
Nostrils (make 2):
Ch2, work 8 sc into 1st ch, join round with a ss into the first sc – 8
st.
FO one of them leaving a length of yarn.
Do not FO the second nostril. To join them together sc into the 1st
stitch after the ss on the first nostril, sc into next 7 st. Sc into the
1st stitch after the ss on the second nostril, sc into next 7 st. You
now have the start of the nose with 16 st. Use the length of yarn to
sew up the gap between the two parts.

Body (continue from nose):
Round 1: Sc in each st around – 16 st.
Round 2: [Sc2tog, sc in next 6 st] 2 times – 14 st.
Round 3: Sc in each st around – 14 st.
Round 4: [Sc2tog, sc in next 5 st] 2 times – 12 st.
Round 5 – 6: (2 rounds) Sc in each st around – 12 st.
Round 7: Sc in next 5 st, 2 sc in next st, sc in next st, 2 sc in next
st, sc in next 4 st – 14 st.
Round 8 – 10: (3 rounds) Sc in each st around – 14 st.
If using safety eyes, fit now between round 8 and 9 on either side
of the head.
Round 11: Sc in next 6 st, sc2tog, sc in next st, sc2tog, sc in next
3 st – 12 st.
Round 12: Sc in next st, sc2tog, sc in next 4 st, sc2tog, sc in next
3 st – 10 st.
Round 13 – 17: (5 rounds) Sc in each st around – 10 st.
Round 18: [2 sc in next st, sc in next 4 st] 2 times – 12 st.
Round 19 – 20: (2 rounds) Sc in each st around – 12 st.
Round 21: Sc in next 3 st, [2 sc in next st, sc in next st] 3 times,
sc in next 3 st – 15 st.
Round 22: Sc in next 3 st, [2 sc in next st, sc in next 2 st] 3 times,
sc in next 3 st – 18 st.
Round 23: Sc in each st around – 18 st.
Round 24: [2 sc in next st, sc in next 2 st] 6 times – 24 st.
Round 25 – 26: (2 rounds) Sc in each st around – 24 st.
Round 27: [2 sc in next st, sc in next 5 st] 4 times – 28 st.
Round 28 – 31: (4 rounds) Sc in each st around – 28 st.
Round 32: [Sc2tog, sc in next 5 st] 4 times – 24 st.
Round 33: Sc in each st around – 24 st.
Round 34: [Sc2tog, sc in next 4 st] 4 times – 20 st.
Round 35: Sc in each st around – 20 st.
Round 36: [Sc2tog, sc in next 3 st] 4 times – 16 st.
Round 37: Sc in each st around – 16 st.
Round 38: [Sc2tog, sc in next 6 st] 2 times – 14 st.
Round 39: Sc in each st around – 14 st.
Round 40: [Sc2tog, sc in next 5 st] 2 times – 12 st.
Round 41 – 50: (10 rounds) Sc in each st around – 12 st.
Round 51: Sc2tog, sc in next 10 st – 11 st.
Round 52 – 53: (2 rounds) Sc in each st around – 11 st.
Round 54: Sc2tog, sc in next 9 st – 10 st.
Round 55 – 56: (2 rounds) Sc in each st around – 10 st.
Round 57: Sc2tog, sc in next 8 st – 9 st.
Round 58 – 59: (2 rounds) Sc in each st around – 9 st.
Round 60: Sc2tog, sc in next 7 st – 8 st.
Round 61 – 63: (3 rounds) Sc in each st around – 8 st.
Round 64: Sc2tog, sc in next 6 st – 7 st.
Round 65 – 73: (9 rounds) Sc in each st around – 7 st.
Round 74: Sc2tog, sc in next 5 st – 6 st.
Round 75 – 76: (2 rounds) Sc in each st around – 6 st.
FO, finish stuffing and sew up end of tail.
Back Legs (make 2):
Stuff as you go along.
Round 1: Ch 2, work 6 sc into 1st ch – 6 st.
Round 2: 2 sc in each st around – 12 st.
Round 3 – 5: (3 rounds) Sc in each st around – 12 st.
Round 6: Sc in next 6 st, [sc2tog] 3 times – 9 st.
Round 7 – 8: (2 rounds) Sc in each st around – 9 st.
Round 9: Sc in next 6 st, [2 sc in next st] 3 times – 12 st.
Round 10: [2 sc in next st, sc in next st] 6 times – 18 st.
Round 11 – 12: (2 rounds) Sc in each st around – 18 st.
Round 13: Sc in next 3 st, [sc2tog] 2 times, sc in next 5 st,
[sc2tog] 2 times, sc in next 2 st – 14 st.
Round 14: Sc in next 2 st, [sc2tog] 2 times, sc in next 3 st,
[sc2tog] 2 times, sc in next st – 10 st.
Round 15: [Sc2tog] 5 times – 5 st.
FO, leaving a length of yarn.
Finish stuffing, then use cream/beige yarn to sew claws. Sew up top
of leg.
Front Legs (make 2):
Stuff as you go along.
Round 1: Ch 2, work 5 sc into 1st ch – 5 st.
Round 2: 2 sc in each st around – 10 st.
Round 3 – 5: (3 rounds) Sc in each st around – 10 st.
Round 6: Sc in next 6 st, [sc2tog] 2 times – 8 st.
Round 7 – 12: (6 rounds) Sc in each st around – 8 st.
Round 13: [Sc2tog, sc in next 2 st] 2 times – 6 st.
FO, leaving a length of yarn.
Finish stuffing, then use cream/beige yarn to sew claws. Sew up top
of leg.
Spikes on back:
Small – ch 3, sc into 2nd ch from hook, hdc into 3rd ch from hook,
ch1.
Large – ch 3, sc into 2nd ch from hook, YOH, hook into next ch, YOH
and pull through st, YOH, pull through 2 loops, YOH, into same st,
YOH and pull through st, YOH and through all loops on hook, ch1.
You make the spikes continuously.
Work 3 small, 10 large, 3 small, ch 2, sc into 2nd ch from hook, ch
1, FO. Leave a length of yarn to sew to the body. Depending on the
length of your dragon you may need to adjust the number of spikes
you make to fit along your dragon’s back from behind the eyes to
the tip of the tail.
Wings (make 2):
Ch 20.
Row 1: Miss 1st ch, sc in next 7 ch, hdc in next 6 ch, dc in next 6
ch, ch 2, turn.
Row 2: Fpdc in next 6 st, fphdc in next 6 st, fpsc in next 7 st, ch 1,
turn.
Row 3: Fpsc in next 7 st, hdc in next 6 st, dc in next 6 st, ch 3,
turn.
Row 4: Miss 1st ch, ss in next ch, sc in next ch (to make claws),
fpdc in next 6 st, fphdc in next 6 st, fpsc in next 7 st, ch 1, turn.
Row 5: Fpsc in next 7 st, hdc in next 6 st, dc in next 6 st, ch 2,
turn.
Row 6: Fpdc in next 6 st, fphdc in next 6 st, fpsc in next 7 st, ch 1,
turn.
Row 7: Fpsc in next 7 st, hdc in next 6 st, dc in next 6 st, ch 3,
turn.
Row 8: Miss 1st ch, ss in next ch, sc in next ch, fpdc in next 6 st,
fphdc in next 6 st, fpsc in next 7 st, ch 1, turn.
Row 9: Fpsc in next 7 st, hdc in next 6 st, dc in next 6 st, ch 2,
turn.
Row 10: Fpdc in next 6 st, fphdc in next 6 st, fpsc in next 7 st, ch
1, turn.
Row 11: Fpsc in next 7 st, hdc in next 6 st, dc in next 6 st, ch 3,
turn.
Row 12: Miss 1st ch, ss in next ch, sc in next ch, fpdc in next 6 st,
fphdc in next 6 st, fpsc in next 7 st.
Sc into every other row along the base of the wing – 6 st.
Ss along the back of the original ch (19 st) until you get to the tip of
the wing. Make claw – ch 3, turn, miss 1st ch, ss in next ch, sc in
next ch. FO leaving a good length of yarn. Use this to secure the
last claw to the rest of the wing, then take yarn through wing to its
base, ready to sew onto body. Weave in ends.
Ears (make 2):
Ch 6, turn.
Skip 1st st, sc, dc, sc, ss. Leave the last ch and ss into the back of
the previous 4 st. FO, leaving a length of yarn.
Completing your dragon:

All the body parts ready to be assembled – the wing on the left shows the
top and the wing on the right shows the ridged underside.
Sew the spikes along the back from just behind the ears to the tip
of the tail. Take your time to make sure they are straight and in the
exact middle of the back. This will be helpful when you try to
position the wings and the legs.
If you haven’t used safety eyes, embroider eyes or sew on beads
for eyes. Embroider a roughly diamond shape in a contrasting
colour, then use black for the pupils so they look a bit like cat’s
eyes.
Sew the ears onto head above eyes, going over the last chain
several times to create the brow bone shape. Weave in any ends.

Sew the legs on in the positions shown.
Sew on the wings a little distance from either side of the spikes with
the front edge about level with the front legs. The ridged side
should be the underside of the wings.

Your fierce little dragon is all finished now!
Pattern copyright Lucy Collin 2011. All rights reserved. This is a free
pattern of my design so share as you like, but do not sell it. If you
sell products made from this pattern, please credit Lucy
Collin/LucyRavenscar as the designer.

Be First to Comment

Leave a Reply

DMCA.com Protection Status